Служба rtorrent - Історія редагувань

95.134.43.29 в 18:51, 23 травня 2009

2009-05-23T18:51:37Z

91.124.47.194 в 13:35, 21 травня 2009

2009-05-21T13:35:31Z

91.124.47.194 в 13:33, 21 травня 2009

2009-05-21T13:33:49Z

91.124.47.194 в 13:32, 21 травня 2009

2009-05-21T13:32:40Z

Показати зміни

91.124.47.194 в 13:28, 21 травня 2009

2009-05-21T13:28:02Z

91.124.47.194: Created page with 'Строримо такий файлик з правами на виконання

 #!/bin/bash # # chkconfig: - 95 05 # description: rtorrent daemon # process name: fail2ba...'

2009-05-21T13:26:55Z

Created page with 'Строримо такий файлик з правами на виконання <pre> #!/bin/bash # # chkconfig: - 95 05 # description: rtorrent daemon # process name: fail2ba...'

Нова сторінка

Строримо такий файлик з правами на виконання
<pre>
#!/bin/bash
#
# chkconfig: - 95 05
# description: rtorrent daemon
# process name: fail2ban-server
#
#
# Author: Andrew G
# Licensed under the GPLv2

#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf

#Do not put a space on either side of the equal signs e.g.
# system user to run as
user="'''andrew'''"

# the system group to run as, not implemented, see start for beginning implementation
# group=`id -ng "$user"`

# the full path to the filename where you store your rtorrent configuration
config="`su -c 'echo $HOME' $user`/.rtorrent.rc"

# set of options to run with
options=""

# default directory for screen, needs to be an absolute path
base="`su -c 'echo $HOME' $user`"

# name of screen session
srnname="rtorrent"

# file to log to (makes for easier debugging if something goes wrong)
logfile="/var/log/rtorrentInit.log"

PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

. /etc/init.d/functions
RETVAL=0
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}

start() {
echo -n "Starting $DESC: $NAME"
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
echo_success
echo
RETVAL=0
}

stop() {
echo -n "Stopping $DESC: $NAME"
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
echo_success
echo
RETVAL=0
}

getsession() {
session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
echo $session
}

checkcnfg

case "$1" in
start)
start
;;
stop)
stop
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
echo
stop
sleep 1
start
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit $RETVAL
</pre>
Ну і запускаємо
chkconfig rtorrent on

← Попередня версія		Версія за 18:51, 23 травня 2009
Рядок 125:		Рядок 125:
	chkconfig rtorrent on		chkconfig rtorrent on

−	~~<br>~~	+	Ще для правильної роботи комбінацій клавіш таких як Ctrl+S
		+
		+	Створюємо файл /home/user/.screenrc з вмістом
		+	defflow off

@@ Рядок 3: / Рядок 3: @@
 замість користувача andrew підставити свого
-налаштування rtorrent в /home/andrew/.rtorrent.rc
+налаштування [[rtorrent]] в /home/andrew/.rtorrent.rc
   #!/bin/bash
+  #
@@ Рядок 38: / Рядок 38: @@
   srnname="rtorrent"
   # file to log to (makes for easier debugging if something goes wrong)
-  logfile="'''/var/log/rtorrentInit.log"'''
+  '''logfile="/var/log/rtorrentInit.log"'''
   PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
   DESC="rtorrent"

@@ Рядок 9: / Рядок 9: @@
   # description: rtorrent daemon
   # process name: rtorrent
+  #
   # Author: Andrew G
   # Licensed under the GPLv2
   #######################
   ##Start Configuration##
@@ Рядок 26: / Рядок 24: @@
   # for the one you used. note the space after the ".".
   # . /etc/rtorrent.init.conf
   #Do not put a space on either side of the equal signs e.g.
   # system user to run as
-  user="andrew"
+  '''user="andrew"'''
   # the system group to run as, not implemented, see start for beginning implementation
   # group=`id -ng "$user"`
   # the full path to the filename where you store your rtorrent configuration
   config="`su -c 'echo $HOME' $user`/.rtorrent.rc"
   # set of options to run with
   options=""
   # default directory for screen, needs to be an absolute path
   base="`su -c 'echo $HOME' $user`"
   # name of screen session
   srnname="rtorrent"
   # file to log to (makes for easier debugging if something goes wrong)
   logfile="'''/var/log/rtorrentInit.log"'''
@@ Рядок 53: / Рядок 44: @@
   DAEMON=$NAME
   SCRIPTNAME=/etc/init.d/$NAME
   . /etc/init.d/functions
   RETVAL=0
@@ Рядок 78: / Рядок 68: @@
       fi
+  }
   start() {
       echo -n "Starting $DESC: $NAME"
@@ Рядок 92: / Рядок 81: @@
       RETVAL=0
+  }
   stop() {
       echo -n "Stopping $DESC: $NAME"
@@ Рядок 107: / Рядок 95: @@
       RETVAL=0
+  }
   getsession() {
       session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
       echo $session
+  }
   checkcnfg
   case "$1" in
     start)

@@ Рядок 1: / Рядок 1: @@
 Строримо такий файлик з правами на виконання
-<pre>
+<pre>#!/bin/bash
+#
 # chkconfig: - 95 05
 # description: rtorrent daemon
-# process name: fail2ban-server
+# process name: rtorrent
+#
+#
@@ Рядок 56: / Рядок 55: @@
 checkcnfg() {
      exists=0
-     for i in `echo "$PATH" | tr ':' '\n'` ; do
+     for i in `echo "$PATH" | tr ':' '\n'`&nbsp;; do
-         if [ -f $i/$NAME ] ; then
+         if [ -f $i/$NAME ]&nbsp;; then
              exists=1
              break
          fi
      done
-     if [ $exists -eq 0 ] ; then
+     if [ $exists -eq 0 ]&nbsp;; then
-         echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
+         echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" &gt;&amp;2
          exit 3
      fi
-     if ! [ -r "${config}" ] ; then
+     if&nbsp;! [ -r "${config}" ]&nbsp;; then
-         echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
+         echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" &gt;&amp;2
          exit 3
      fi
      session=`getsession "$config"`
-     if ! [ -d "${session}" ] ; then
+     if&nbsp;! [ -d "${session}" ]&nbsp;; then
-         echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
+         echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" &gt;&amp;2
          exit 3
      fi
@@ Рядок 79: / Рядок 78: @@
 start() {
      echo -n "Starting $DESC: $NAME"
-     [ -d "${base}" ] && cd "${base}"
+     [ -d "${base}" ] &amp;&amp; cd "${base}"
-     stty stop undef && stty start undef
+     stty stop undef &amp;&amp; stty start undef
-     su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
+     su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2&gt;&amp;1 1&gt;/dev/null" ${user} | tee -a "$logfile" &gt;&amp;2
      # this works for the screen command, but starting rtorrent below adopts screen session gid
      # even if it is not the screen session we started (e.g. running under an undesirable gid
-     #su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
+     #su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2&gt;&amp;1 1&gt;/dev/null\"" ${user} | tee -a "$logfile" &gt;&amp;2
-     su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
+     su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2&gt;&amp;1 1&gt;/dev/null" ${user} | tee -a "$logfile" &gt;&amp;2
      echo_success
      echo
@@ Рядок 94: / Рядок 93: @@
      echo -n "Stopping $DESC: $NAME"
      session=`getsession "$config"`
-     if ! [ -s ${session}/rtorrent.lock ] ; then
+     if&nbsp;! [ -s ${session}/rtorrent.lock ]&nbsp;; then
          return
      fi
      pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
-     if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
+     if ps -A | grep -sq ${pid}.*rtorrent&nbsp;; then # make sure the pid doesn't belong to another process
          kill -s INT ${pid}
      fi
@@ Рядок 116: / Рядок 115: @@
    start)
      start
-    ;;
+   &nbsp;;;
    stop)
      stop
-    ;;
+   &nbsp;;;
    restart|force-reload)
      echo -n "Restarting $DESC: $NAME"
@@ Рядок 126: / Рядок 125: @@
      sleep 1
      start
-    ;;
+   &nbsp;;;
    *)
-     echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+     echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" &gt;&amp;2
      exit 1
-    ;;
+   &nbsp;;;
 esac
 exit $RETVAL
 </pre>
 Ну і запускаємо
   chkconfig rtorrent on