Wiki Welard - Внесок користувача [uk]

Linux

2009-05-21T13:38:28Z

91.124.47.194:

Операційна система

[[Checkinstall]]
[[Fstab]]
[[LDAP-configure]]
[[Mail setting]]
[[OpenSSL]]
[[Centos Repo]]
[[Centos multimedia]]
[[Yum]]
[[RPM]]
[[Управління rpm]]
[[Ssh]]
[[SPF]]
[[OpenVPN]]
[[Nginx-as-reverse-proxy]]
[[Ldap-errors]]
[[DNS]]
[[Iptables]]
[[OpenLDAP]]
[[Iptables]]
[[SSL configure]]
[[СentOS]]
[[Php fastcgi]]
[[Nginx Django]]
[[Vim]]
[[Захист SSH]]
[[Install_FTP_Server]]
[[Iftop]]
[[Webmin]]
[[Squid]]
[[EraseDNS]]
[[Rtorrent]]

Rtorrent

2009-05-21T13:38:07Z

91.124.47.194:

rTorrent — консольный клиент BitTorrent, написанный на C++ для GNU/Linux и других UNIX‐подобных операционных систем, на основе библиотеки libTorrent (не путать с libtorrent).

Использует библиотеку ncurses для вывода. Отличается нетребовательностью к системным ресурсам.

rTorrent — свободное программное обеспечение, распространяемое на условиях GNU General Public License.

Читати також [[Служба_rtorrent]]

== Приклад настройки .rtorrent.rc ==

encoding_list = UTF-8
min_peers = 1
max_peers = 500
max_uploads = 50
directory = /srv/shara/torrent
session = /home/andrew/.rtorrent/
port_range = 6890-6890
port_random = no

download_rate = 35
upload_rate = 35
schedule = watch_directory,5,5,load_start=/srv/shara/torrent/@list/*.torrent
schedule = untied_directory,5,5,stop_untied=
schedule = low_diskspace,5,60,close_low_diskspace=500M

schedule = throttle_1,01:30:00,24:00:00,download_rate=100
schedule = throttle_2,01:30:00,24:00:00,upload_rate=100
schedule = throttle_3,07:00:00,24:00:00,download_rate=35
schedule = throttle_4,07:00:00,24:00:00,upload_rate=35

check_hash = yes
use_udp_trackers = yes
encryption = allow_incoming,try_outgoing,enable_retry
#dht = auto
#dht_port = 21345
#peer_exchange = yes

Rtorrent

2009-05-21T13:36:58Z

91.124.47.194: Created page with 'rTorrent — консольный клиент BitTorrent, написанный на C++ для GNU/Linux и других UNIX‐подобных операционных сис...'

rTorrent — консольный клиент BitTorrent, написанный на C++ для GNU/Linux и других UNIX‐подобных операционных систем, на основе библиотеки libTorrent (не путать с libtorrent).

Использует библиотеку ncurses для вывода. Отличается нетребовательностью к системным ресурсам.

rTorrent — свободное программное обеспечение, распространяемое на условиях GNU General Public License.

== Приклад настройки .rtorrent.rc ==

encoding_list = UTF-8
min_peers = 1
max_peers = 500
max_uploads = 50
directory = /srv/shara/torrent
session = /home/andrew/.rtorrent/
port_range = 6890-6890
port_random = no

download_rate = 35
upload_rate = 35
schedule = watch_directory,5,5,load_start=/srv/shara/torrent/@list/*.torrent
schedule = untied_directory,5,5,stop_untied=
schedule = low_diskspace,5,60,close_low_diskspace=500M

schedule = throttle_1,01:30:00,24:00:00,download_rate=100
schedule = throttle_2,01:30:00,24:00:00,upload_rate=100
schedule = throttle_3,07:00:00,24:00:00,download_rate=35
schedule = throttle_4,07:00:00,24:00:00,upload_rate=35

check_hash = yes
use_udp_trackers = yes
encryption = allow_incoming,try_outgoing,enable_retry
#dht = auto
#dht_port = 21345
#peer_exchange = yes

Служба rtorrent

2009-05-21T13:35:31Z

91.124.47.194:

Строримо такий файлик з правами на виконання

замість користувача andrew підставити свого

налаштування [[rtorrent]] в /home/andrew/.rtorrent.rc
#!/bin/bash
#
# chkconfig: - 95 05
# description: rtorrent daemon
# process name: rtorrent
#
# Author: Andrew G
# Licensed under the GPLv2
#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf
#Do not put a space on either side of the equal signs e.g.
# system user to run as
'''user="andrew"'''
# the system group to run as, not implemented, see start for beginning implementation
# group=`id -ng "$user"`
# the full path to the filename where you store your rtorrent configuration
config="`su -c 'echo $HOME' $user`/.rtorrent.rc"
# set of options to run with
options=""
# default directory for screen, needs to be an absolute path
base="`su -c 'echo $HOME' $user`"
# name of screen session
srnname="rtorrent"
# file to log to (makes for easier debugging if something goes wrong)
'''logfile="/var/log/rtorrentInit.log"'''
PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME
. /etc/init.d/functions
RETVAL=0
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}
start() {
echo -n "Starting $DESC: $NAME"
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
echo_success
echo
RETVAL=0
}
stop() {
echo -n "Stopping $DESC: $NAME"
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
echo_success
echo
RETVAL=0
}
getsession() {
session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
echo $session
}
checkcnfg
case "$1" in
start)
start
 ;;
stop)
stop
 ;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
echo
stop
sleep 1
start
 ;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
 ;;
esac
exit $RETVAL

Ну і запускаємо

chkconfig rtorrent on

<br>

Служба rtorrent

2009-05-21T13:33:49Z

91.124.47.194:

Строримо такий файлик з правами на виконання

замість користувача andrew підставити свого

налаштування rtorrent в /home/andrew/.rtorrent.rc
#!/bin/bash
#
# chkconfig: - 95 05
# description: rtorrent daemon
# process name: rtorrent
#
# Author: Andrew G
# Licensed under the GPLv2
#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf
#Do not put a space on either side of the equal signs e.g.
# system user to run as
'''user="andrew"'''
# the system group to run as, not implemented, see start for beginning implementation
# group=`id -ng "$user"`
# the full path to the filename where you store your rtorrent configuration
config="`su -c 'echo $HOME' $user`/.rtorrent.rc"
# set of options to run with
options=""
# default directory for screen, needs to be an absolute path
base="`su -c 'echo $HOME' $user`"
# name of screen session
srnname="rtorrent"
# file to log to (makes for easier debugging if something goes wrong)
logfile="'''/var/log/rtorrentInit.log"'''
PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME
. /etc/init.d/functions
RETVAL=0
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}
start() {
echo -n "Starting $DESC: $NAME"
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
echo_success
echo
RETVAL=0
}
stop() {
echo -n "Stopping $DESC: $NAME"
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
echo_success
echo
RETVAL=0
}
getsession() {
session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
echo $session
}
checkcnfg
case "$1" in
start)
start
 ;;
stop)
stop
 ;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
echo
stop
sleep 1
start
 ;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
 ;;
esac
exit $RETVAL

Ну і запускаємо

chkconfig rtorrent on

<br>

Служба rtorrent

2009-05-21T13:32:40Z

91.124.47.194:

Строримо такий файлик з правами на виконання

замість користувача andrew підставити свого

налаштування rtorrent в /home/andrew/.rtorrent.rc
#!/bin/bash
#
# chkconfig: - 95 05
# description: rtorrent daemon
# process name: rtorrent
#
#
# Author: Andrew G
# Licensed under the GPLv2

#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf

#Do not put a space on either side of the equal signs e.g.
# system user to run as
user="andrew"

# the system group to run as, not implemented, see start for beginning implementation
# group=`id -ng "$user"`

# the full path to the filename where you store your rtorrent configuration
config="`su -c 'echo $HOME' $user`/.rtorrent.rc"

# set of options to run with
options=""

# default directory for screen, needs to be an absolute path
base="`su -c 'echo $HOME' $user`"

# name of screen session
srnname="rtorrent"

# file to log to (makes for easier debugging if something goes wrong)
logfile="'''/var/log/rtorrentInit.log"'''
PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

. /etc/init.d/functions
RETVAL=0
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}

start() {
echo -n "Starting $DESC: $NAME"
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
echo_success
echo
RETVAL=0
}

stop() {
echo -n "Stopping $DESC: $NAME"
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
echo_success
echo
RETVAL=0
}

getsession() {
session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
echo $session
}

checkcnfg

case "$1" in
start)
start
 ;;
stop)
stop
 ;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
echo
stop
sleep 1
start
 ;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
 ;;
esac
exit $RETVAL

Ну і запускаємо

chkconfig rtorrent on

<br>

Служба rtorrent

2009-05-21T13:28:02Z

91.124.47.194:

Строримо такий файлик з правами на виконання
<pre>#!/bin/bash
#
# chkconfig: - 95 05
# description: rtorrent daemon
# process name: rtorrent
#
#
# Author: Andrew G
# Licensed under the GPLv2

#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf

#Do not put a space on either side of the equal signs e.g.
# system user to run as
user="'''andrew'''"

# the system group to run as, not implemented, see start for beginning implementation
# group=`id -ng "$user"`

# the full path to the filename where you store your rtorrent configuration
config="`su -c 'echo $HOME' $user`/.rtorrent.rc"

# set of options to run with
options=""

# default directory for screen, needs to be an absolute path
base="`su -c 'echo $HOME' $user`"

# name of screen session
srnname="rtorrent"

# file to log to (makes for easier debugging if something goes wrong)
logfile="/var/log/rtorrentInit.log"

PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

. /etc/init.d/functions
RETVAL=0
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}

start() {
echo -n "Starting $DESC: $NAME"
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
echo_success
echo
RETVAL=0
}

stop() {
echo -n "Stopping $DESC: $NAME"
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
echo_success
echo
RETVAL=0
}

getsession() {
session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
echo $session
}

checkcnfg

case "$1" in
start)
start
 ;;
stop)
stop
 ;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
echo
stop
sleep 1
start
 ;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
 ;;
esac
exit $RETVAL
</pre>
Ну і запускаємо

chkconfig rtorrent on

Служба rtorrent

2009-05-21T13:26:55Z

91.124.47.194: Created page with 'Строримо такий файлик з правами на виконання <pre> #!/bin/bash # # chkconfig: - 95 05 # description: rtorrent daemon # process name: fail2ba...'

Строримо такий файлик з правами на виконання
<pre>
#!/bin/bash
#
# chkconfig: - 95 05
# description: rtorrent daemon
# process name: fail2ban-server
#
#
# Author: Andrew G
# Licensed under the GPLv2

#######################
##Start Configuration##
#######################
# You can specify your configuration in a different file
# (so that it is saved with upgrades, saved in your home directory,
# or whateve reason you want to)
# by commenting out/deleting the configuration lines and placing them
# in a text file (say /home/user/.rtorrent.init.conf) exactly as you would
# have written them here (you can leave the comments if you desire
# and then uncommenting the following line correcting the path/filename
# for the one you used. note the space after the ".".
# . /etc/rtorrent.init.conf

#Do not put a space on either side of the equal signs e.g.
# system user to run as
user="'''andrew'''"

# the system group to run as, not implemented, see start for beginning implementation
# group=`id -ng "$user"`

# the full path to the filename where you store your rtorrent configuration
config="`su -c 'echo $HOME' $user`/.rtorrent.rc"

# set of options to run with
options=""

# default directory for screen, needs to be an absolute path
base="`su -c 'echo $HOME' $user`"

# name of screen session
srnname="rtorrent"

# file to log to (makes for easier debugging if something goes wrong)
logfile="/var/log/rtorrentInit.log"

PATH=/usr/bin:/usr/local/bin:/usr/local/sbin:/sbin:/bin:/usr/sbin
DESC="rtorrent"
NAME=rtorrent
DAEMON=$NAME
SCRIPTNAME=/etc/init.d/$NAME

. /etc/init.d/functions
RETVAL=0
checkcnfg() {
exists=0
for i in `echo "$PATH" | tr ':' '\n'` ; do
if [ -f $i/$NAME ] ; then
exists=1
break
fi
done
if [ $exists -eq 0 ] ; then
echo "cannot find rtorrent binary in PATH $PATH" | tee -a "$logfile" >&2
exit 3
fi
if ! [ -r "${config}" ] ; then
echo "cannot find readable config ${config}. check that it is there and permissions are appropriate" | tee -a "$logfile" >&2
exit 3
fi
session=`getsession "$config"`
if ! [ -d "${session}" ] ; then
echo "cannot find readable session directory ${session} from config ${config}. check permissions" | tee -a "$logfile" >&2
exit 3
fi
}

start() {
echo -n "Starting $DESC: $NAME"
[ -d "${base}" ] && cd "${base}"
stty stop undef && stty start undef
su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "screen -dm -S ${srnname} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
# this works for the screen command, but starting rtorrent below adopts screen session gid
# even if it is not the screen session we started (e.g. running under an undesirable gid
#su -c "screen -ls | grep -sq "\.${srnname}[[:space:]]" " ${user} || su -c "sg \"$group\" -c \"screen -fn -dm -S ${srnname} 2>&1 1>/dev/null\"" ${user} | tee -a "$logfile" >&2
su -c "screen -S "${srnname}" -X screen rtorrent ${options} 2>&1 1>/dev/null" ${user} | tee -a "$logfile" >&2
echo_success
echo
RETVAL=0
}

stop() {
echo -n "Stopping $DESC: $NAME"
session=`getsession "$config"`
if ! [ -s ${session}/rtorrent.lock ] ; then
return
fi
pid=`cat ${session}/rtorrent.lock | awk -F: '{print($2)}' | sed "s/[^0-9]//g"`
if ps -A | grep -sq ${pid}.*rtorrent ; then # make sure the pid doesn't belong to another process
kill -s INT ${pid}
fi
echo_success
echo
RETVAL=0
}

getsession() {
session=`cat "$1" | grep "^[[:space:]]*session[[:space:]]*=" | sed "s/^[[:space:]]*session[[:space:]]*=[[:space:]]*//" `
echo $session
}

checkcnfg

case "$1" in
start)
start
;;
stop)
stop
;;
restart|force-reload)
echo -n "Restarting $DESC: $NAME"
echo
stop
sleep 1
start
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit $RETVAL
</pre>
Ну і запускаємо
chkconfig rtorrent on